xf86-video-intel is an xorg driver and thus will not change anything before "startx" - it has graphics-KERNEL.tcz as a dep, which is what changes the resolution.
Yes, ...
Yes, ...
↧
Re: TC & NVidia
Yes, ...
↧
Re: HP-2000 Ralink RT5390R Wireless Adapter
Wow! it is still going how long does a typical kernel build take? Is this a compile that is happening now?
What factors mainly affect how long it takes? Disk? Processor? RAM? all of the above?
What factors mainly affect how long it takes? Disk? Processor? RAM? all of the above?
↧
↧
Re: Pi4
Just back in stock at The PiHut, so mine's on order now, should get it next week, waited for the 4GB version, didn't see any point in just getting a 2GB version. ![;)]( "Wink")
Will be following your progress.![:)]( "Smiley")
Will be following your progress.
↧
Re: Trouble with xorg-server on MicroCore 10
Ok, but when i starting Xorg7.7 i expecting to see black screen and a cursor, but i see only a black screen. On the Virtual box i had a cursor, but on a laptop - not.
I tried to config the Xorg by typing "sudo Xorg -configure" and that is what i get:
"...
I tried to config the Xorg by typing "sudo Xorg -configure" and that is what i get:
"...
↧
Re: HP-2000 Ralink RT5390R Wireless Adapter
Search for your driver in the compiled source and make an extension out of it.
↧
↧
Re: TC & NVidia
Hi
I think the Boot Manager like Grub2 cantrol the resolution from the beginning then pass the resolution to the kernel..?
What I'm trying to achieve is reliably ...
↧
Re: How to set up Bluetooth with tinyCore 10?
You need the rpi bluetooth firmware too. But yes, bluez from the 9.x repo wont work.
I'll see if I can get Tim a new copy for his repo.......but mostly we are working on the...
↧
Re: TC & NVidia
Hello
I think Grub2 can handle resolution with either EFI or legacy MBR based boot. However the unknown is PXE ??
Sent from my iPhone using Tapatalk
I think Grub2 can handle resolution with either EFI or legacy MBR based boot. However the unknown is PXE ??
Sent from my iPhone using Tapatalk
↧
Re: Trouble with xorg-server on MicroCore 10
What graphics hardware do you have?
Since most hardware will work with Xorg-7.7 without the need for configuration, I suspect your download failed in some way and you do not have all of the extensions you need.
Since most hardware will work with Xorg-7.7 without the need for configuration, I suspect your download failed in some way and you do not have all of the extensions you need.
↧
↧
Re: HP-2000 Ralink RT5390R Wireless Adapter
"make" = "make bzImage modules", it does more. Distro kernels have some patches, but regarding the compile speed it's that they enable so much stuff that a custom kernel won't.
↧
Re: How to make a legacy bios/uefi dual boot usb stick with syslinux
I'll second what coreplayer2 says - UEFI only (no csm) is a vast speedup.
BUT, the catch is that on another UEFI-only machine I have (Intel Computesticks and now my 2 year old Acer Aspire 1 netbook/laptop chromebook wannabe) may be playing with the UEF...
BUT, the catch is that on another UEFI-only machine I have (Intel Computesticks and now my 2 year old Acer Aspire 1 netbook/laptop chromebook wannabe) may be playing with the UEF...
↧
Re: Trouble with xorg-server on MicroCore 10
I have "00:02.1 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)".
Should i reinstall MicroCore?
Should i reinstall MicroCore?
↧
Re: Trouble with xorg-server on MicroCore 10
There's no need to reinstall Core - if you get to a console prompt Core is working properly.
Do you get a gui with Xvesa?
Do you get a gui with Xvesa?
↧
↧
Re: GRUB 2 always starts in command line - can't proceed - EFI Boot
JimmyJohn
Glad you figured it out
Next time try installing manually without use of third party installers, like Rufus etc etc (Although YUMI EFI reportedly understands tinycore requirement). Again, installing manually is quite easy if you check off t...
Glad you figured it out
Next time try installing manually without use of third party installers, like Rufus etc etc (Although YUMI EFI reportedly understands tinycore requirement). Again, installing manually is quite easy if you check off t...
↧
Re: GRUB 2 always starts in command line - can't proceed - EFI Boot
I pulled the bootx64.efi from a different linux ditro (puppy linux), then i moved the grub.cfg file to the root directory on the usb drive and doing that has gotten it workin...
↧
Re: GRUB 2 always starts in command line - can't proceed - EFI Boot
JimmyJohn
Glad you figured it out
Next time try installing manually without use of third party installers, like Rufus etc etc (Although YUMI EFI reportedly understands tin...
↧
GRUB 2 always starts in command line - can't proceed - EFI Boot
On another note, is it possible to boot the standard 32bit tiny core via UEFI?[/list]
Absolutely you can.
Know this; except in extremely rare cases, (eg ant...
↧
↧
GRUB 2 always starts in command line - can't proceed - EFI Boot
Ooo...
- that you've copied the kernel and initrd (eg: corepure64.gz) to
- sd(x)1/linux/ (or as specified in the grub.cfg file)
↧
Re: Files unreadable for some reason.
Additional note about the SD-Card association formatter tool:
If your Windows or Mac computer used to run this utility does not have an actual sd-card port, I have been very successful in using a high-quality USB <> SD Card dongle to reset some cranky ...
If your Windows or Mac computer used to run this utility does not have an actual sd-card port, I have been very successful in using a high-quality USB <> SD Card dongle to reset some cranky ...
↧
Re: please make this page simpler and more understandable! ?
Outside initrd apps on boot” / “Outside initrd apps”: These options will put the extensions in the ISO image under /tce/optional. If you use “Outside initrd apps on boot” the extension will also be listed in /tce/optional/onboot.lst so that the extensi...
↧